Who is using high power LED bulbs?
- Industrial and mining enterprises and institutional users:
This kind of user is mainly used for workshop lighting, the workshop is usually high (at least four meters or more), the lighting needs to be a single operation site, the lighting requirement is greater than 300lx, light color to cool white (6400K) around noon is usually used in hardware, stamping, processing, In terms of injection molding and other aspects, including site-based operation station as a unit of large equipment, smelting workshop, the location of lamps and lanterns is usually located at the equipment or operation site, and the operating staff are usually more than 8 times when they operate continuously under the lamp after operation. Hour.
- Shopping malls and supermarkets planning simple dining and casual occasions for users:
Such users are mainly used in the usual commercial lighting space, and the same purpose is used in relatively high spaces. The light colors are mainly warm white (3000K) and neutral white (4000K). The location of the ambient air light is usually located above the pile of goods, the dining table or the passenger aisle, and the light is always on for 12 hours.
- Usually rural household users:
The house mainly for decoration is usually not the main house lighting, the general family has about 1-4 high-power lights, the brightness does not exceed 5 hours, the light color becomes cooler (6400K), longevity, bright enough power, and then achieve the real preservation intention It is the original intention of the user to buy.

what do they value
- Must be bright enough: The user's intention to sell high power is to deal with the problem of "brightness", and it must be bright enough! Under the premise of "satisfying light", it is achieved in the most energy-saving way;
- Long-term service life must be satisfied: considering the characteristics of users and the use environment, the service life is short, not only the cost of the second purchase cost, but more importantly, the high cost of repeated replacement labor and the replacement process form a short downtime, strike , direct losses from the impact of business closures and peripheral operations.
- Must have a good luminous color: Although the user is included in the long-term operation of the light, the operator is not clear how much damage is on the "light" in addition to "bright" and "dull", but to make the light as close as possible to natural light really is All the necessary social responsibilities of lighting enterprises, especially under the long-term collective operation under the light, are more important.

How do we handle it?
Regarding the characteristics of LED, if the traditional lighting and light are far away from the concept of separation and can only meet the needs of users for "brightness, light color, and longevity", then it can give play to the imagination of space planning, a wide range of lamps and LED light sources are integrated products, But small safety has to consider replacing the model. Integrating the light source and the light source on the user is a process of disassembly and reloading, which will not only increase the cost of lighting, but also increase the cost of equipment and time, so it is preferred to choose a large number of stocks to replace the needs of the mall, small Safety must first integrate the light source independently as a prototype. The shape, structure, photoelectric color, and equipment usage methods of traditional energy-saving lamps are close to practice. From another level, it also determines that the sales unit price of high-power LED bulbs cannot be higher than traditional high-quality three-color phosphors. There are many high-power energy-saving lamps. Therefore, the Xiaoan team clearly depicts the cost of no energy consumption in terms of traditional quality, the effect is greater than 80Lm/W, the color rendering index is greater than 80Ra, the R9 is greater than 30, and the normal use is more than three years (10 hours of operation per day) A series of anti-repetitive research and experiments have been launched, such as:
- Outline construction
The direction of traditional energy-saving lamps has been determined, then the shape, scale, size, including the light-emitting surface can only be optimized on the basis of energy-saving lamps, it is necessary to coordinate the driver, radiator, lamp beads and transparent cover B100 looks a bit like today The appearance of "gourd doll" and "bottle" is indeed the result of a simple study by a small security team entrusted by a professional industrial planning agency.
-LED lamp beads
LED lamp beads are the brightness of the product resolution, luminous color, luminous flux retention rate and p-number